Unitech Water Solution
Ellis Bridge, Ahmedabad, Gujarat
GST No. 24AZTPS8167N1Z6
TrustSEAL Verified
Call 0804870226689% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 01 Set |
| Brand | UWS |
| RO Capacity | 250 LPH - 50000 LPH |
| Purification Type | Reverse Osmosis |
| Material | FRP / SS 304 / SS 316 |
| RO Membrane Type | Brackish Water / Sea Water / Hot Water / Fouling Resistant |
| Usage/Application | Industrial |
| Features | LOWER POWER CONSUMPTION |
| Max Water Recovery Rate | 60-65 % |
| Number Of Membranes In Ro | Depends on RO Capacity |
| Voltage | 415 V |
| Frequency | 50 HZ |
| High Pressure Pump | SHIMGE / GRUNDFOS / XYLEM |
| Mounting Type | SKID MOUNTED |
| Warranty | One Year against any Manufacturing Defects |
| Certification | CE |
| Phase | 1 / 3 |
| Water Source | Any Source of Water |
| Manufacturing Lead Time | 1 WEEKS - 12 WEEKS |
| Ro Membrane | HYDRANAUTICS / DOW FILMTEC / LG CHEM |
| I Deal In | New Only |
| High Pressure Pump Type | Vertical Multistage Centrifugal Pump |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Water Source Type | Borewell Water |
| Treatment Technique | RO |
| Capacity | 1400 BPH - 15000 BPH |
| Usage/Application | DRINKING |
| Brand | UWS |
| Inlet Water Quality | UP TO 10000 TDS |
| Industry | Food & Beverages |
| Automation Grade | Semi-Automatic |
| Voltage | 230 V / 415 V |
| Frequency | 50 HZ |
| Features | LOWER POWER CONSUMPTION |
| Treated Water Quality | As per Requirement |
| Manufacturing Lead Time | 5 - 6 WEEKS |
| Material | FRP / SS 304 / SS 316 |
| Number Of Membranes In Ro | Depends on Plant Capacity |
| Number Of Filtration Passes | Depends on Raw Water Quality |
| Max Water Recovery Rate | Depends on Inlet Water Quality |
| Control Panel | Electrical / PLC |
| Phase | 3 |
| Warranty | One Year against any manufacturing defects |
| Certification | CE |
| I Deal In | New Only |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Set |
| Brand | UWS |
| RO Capacity | 250 LPH - 50000 LPH |
| Purification Type | Reverse Osmosis |
| Material | FRP / SS 304 / SS 316 |
| RO Membrane Type | Brackish Water / Sea Water / Hot Water / Fouling Resistant |
| Usage/Application | Industrial |
| Features | LOWER POWER CONSUMPTION |
| Max Water Recovery Rate | 60-65 % |
| Automation Grade | Semi-Automatic |
| Number Of Membranes In Ro | Depends on RO Capacity |
| Voltage | 415 V |
| Frequency | 50 HZ |
| High Pressure Pump | SHIMGE / GRUNDFOS / XYLEM |
| Mounting Type | SKID MOUNTED |
| Warranty | One Year against any Manufacturing Defects |
| Certification | CE |
| Phase | 1 / 3 |
| Water Source | Any Source of Water |
| Manufacturing Lead Time | 1 WEEKS - 12 WEEKS |
| I Deal In | New Only |
| High Pressure Pump Type | Vertical Multistage Centrifugal Pump |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Model Name/Number | RO-500 |
| Brand | UWS |
| RO Capacity | 500 (Liter/hour) |
| Purification Type | Reverse Osmosis |
| Material | FRP |
| RO Membrane Type | Brackish Water |
| Usage/Application | Water Purification |
| Features | Lower Power Consumption |
| Max Water Recovery Rate | 50-55 % |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Set |
| Water Source Type | Any Source of Water |
| Treatment Technique | RO |
| Warranty | 1 year |
| Capacity | 500 LPH - 50000 LPH |
| Usage/Application | DRINKING / INDUSTRIAL / DIALYSIS |
| Brand | UWS |
| Installation/Civil Work | Installation Available |
| Inlet Water Quality | UP TO 50000 TDS |
| Purification Capacity | 500 LPH - 50000 LPH |
| Industry | FOOD AND BEVERAGE |
| Type Of Purification Plants | Reverse Osmosis |
| Automation Grade | Fully Automatic |
| Water Source | Any Source of Water |
| Voltage | 415 V |
| Frequency | 50 HZ |
| Features | LOWER POWER CONSUMPTION |
| Max Water Recovery Rate | 90% |
| Treated Water Quality | BIS STANDARS |
| Approximate Power Consumption | 75 KW |
| Manufacturing Lead Time | 30 DAYS |
| Material | SS 316 |
| Customization | Yes |
| Driven Type | Electric |
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Set |
| Water Purification Process | RO |
| Type Of Machines | Water Purification System |
| Bottle Filling Capacity | 50 Containers/min |
| Water Filling Method | Bottle |
| Automation Grade | Semi-Automatic |
| Installation/Civil Work | Installation Available |
| Certifications | BIS |
| Brand | UWS |
| Plant Accessories | PET Blowing Machine |
| Purification Capacity | 2000 L/hour |
| Number Of Membranes In Ro | 8 |
| Control Panel | With Control Panel |
| Features | LOWER POWER CONSUMPTION |
| Usage/Application | DRINKING WATER |
| Area Available Of Plant Installation | 2000 SQ. FEET - 12000 SQ. FEET |
| Material | SS 304 |
| Voltage | 415 |
| R O Membrane | DOW FILMTEC |
| Input Tds Upto | 20000 PPM |
| Phase | 3 |
| Laboratory | CHEMICAL AND MICROBIOLOGICAL |
| Frontal Pipeline | SS 304 |
| Warranty | ONE YEAR AGAINST MANUFACTURING DEFECTS |
| I Deal In | New Only |
| Water Source | Borewell Water |
Additional Information:
Product Details:
| Water Source Type | Any Source of Water |
| Treatment Technique | UF + RO |
| Capacity | 500 LPH - 50000 LPH |
| Usage/Application | DRINKING / INDUSTRIAL / DIALYSIS |
| Brand | UWS |
| Inlet Water Quality | UP TO 50000 TDS |
| Industry | All |
| Automation Grade | Fully Automatic |
| Voltage | 230 V / 415 V |
| Frequency | 50 HZ |
| Features | LOWER POWER CONSUMPTION |
| Treated Water Quality | As per Requirement |
| Manufacturing Lead Time | 1 WEEK |
| Material | MS / SS 304 / SS 316 |
| Number Of Membranes In Ro | Depends on Plant Capacity |
| Number Of Filtration Passes | Depends on Raw Water Quality |
Additional Information:
Product Details:
| Filling Material | Mineral Water |
| Water Purification Process | RO |
| Container Type | Jar |
| Automation Grade | Semi-Automatic |
| Installation/Civil Work | Installation Available |
| Warranty | 1 year |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Water Source Type | Industrial Wastewater |
| Treatment Technique | Bar Screen Chamber + Primary Settling Tank + Aeration Chamber + Secondary Clarifier + PSF + ACF + UF |
| Capacity | 1 KLD - 500 KLD |
| Usage/Application | Waste Water Treatment Plant |
| Brand | UWS |
| Industry | ALL |
| Automation Grade | Fully Automatic |
| Installation Type | Prefabricated |
| Country of Origin | Made in India |
How does a Sewage Treatment Plant Work?
Sewage Treatment works in four different methods first the waste goes through the initial process called the preliminary method where most of the course solids are removed. This process includes large filtering screens these help in removing solid objects.
1. Primary treatment
After which the sewage passes to the primary treatment where 60 percent of loose solids are removed as they sink to the bottom only the water oil grease and water remain afloat. This phase removes at least 60 percent of loose solids.
2. Secondary treatment
When the wastewater comes to the secondary phase the Effluents are treated further to remove dissolve suspended biological matter. The secondary treatment uses sedimentation and biological sludge. This treatment requires a separation process to remove the micro-organisms to then release it to tertiary stage of treatment.
3. Tertiary treatment
In the last and final stage the water goes to filters again to remove more waste if any found lingering from the secondary treatment. The wastewater then is disinfected chemically either through micro-filtration which filters the water completely before releasing it to the seawater, lakes or ponds.
Additional Information:
Product Details:
| Installation Type | All |
| Industry | All Type of Industries |
| Water Source | Waste Water |
| Air Blower Power | Depends on Plant Capacity |
| Capacity | 1 KLD - 500 KLD |
| Impurities To Be Removed | Total Suspended Impurities / COD / BOD |
| Treatment Stages | Bar Screen Chamber + Primary Settling Tank + Aeration Tank + Secondary Clarifier + PSF + ACF |
| Secondary Treatment Type | MBR / MBBR |
| Automation Grade | Automatic |
| Water Pump Power | Depends on Plant Capacity |
| Air Blower Count | 2 |
| Features | Flexibility to correct the performance by just adding the media in reactor or increasing the Air qty |
| Usage/Application | Waster Water Treatment Plant |
| Treated Water Quality | As Per Pollution Control Board Norms |
| Overall Dimensions | Depends on Plant Capacity |
| Manufacturing Lead Time | 30 - 45 DAYS |
| Control Module | Control Module Available |
| Air Blower Flow | Depends on Plant Capacity |
| Equalization Chamber Volume | Optional |
| Sludge Holding Chamber Volume | Depends on Plant Capacity |
| Aeration Chamber Volume | Depends on Plant Capacity |
| Clarifier Chamber Volume | Depends on Plant Capacity |
| Disinfection Chamber Volume | Depends on Plant Capacity |
| Filtration System | Sand Filter + Activated Carbon Filter |
| Land Occupation | Depends on Plant Capacity |
| Brand | UWS |
| I Deal In | New Only |
| Country of Origin | Made in India |
How does a Sewage Treatment Plant Work?
Sewage Treatment works in four different methods first the waste goes through the initial process called the preliminary method where most of the course solids are removed. This process includes large filtering screens these help in removing solid objects.
1. Primary treatment
After which the sewage passes to the primary treatment where 60 percent of loose solids are removed as they sink to the bottom only the water oil grease and water remain afloat. This phase removes at least 60 percent of loose solids.
2. Secondary treatment
When the wastewater comes to the secondary phase the Effluents are treated further to remove dissolve suspended biological matter. The secondary treatment uses sedimentation and biological sludge. This treatment requires a separation process to remove the micro-organisms to then release it to tertiary stage of treatment.
3. Tertiary treatment
In the last and final stage the water goes to filters again to remove more waste if any found lingering from the secondary treatment. The wastewater then is disinfected chemically either through micro-filtration which filters the water completely before releasing it to the seawater, lakes or ponds.
Additional Information:
Product Details:
| Water Source Type | Industrial Wastewater |
| Treatment Technique | UF + RO |
| Capacity | 1 KLD - 500 KLD |
| Usage/Application | Waste Water Treatment Plant |
| Brand | UWS |
| Industry | All |
| Automation Grade | Semi-Automatic |
| Installation Type | Containerized Plug & Play |
| Voltage | 230 V / 415 V |
| Frequency | 50 HZ |
| Treated Water Quality | COD < 100, BOD < 30 |
| Manufacturing Lead Time | 30 - 45 DAYS |
| Number Of Membranes In Ro | Depends on Plant Capacity |
| Control Panel | Electrical / PLC |
| Phase | 3 |
| Warranty | One Year against any manufacturing defects |
| Certification | CE |
| Aeration Chamber Volume | Depends on Plant Capacity |
| Air Blower Count | Depends on Plant Capacity |
| Clarifier Chamber Volume | Depends on Plant Capacity |
| Disinfection Chamber Volume | Depends on Plant Capacity |
| End Use Of Treated Water | Process Water / Gardening / Drinking |
| Equalization Chamber Volume | Depends on Plant Capacity |
| I Deal In | New Only |
| Country of Origin | Made in India |
How does a Sewage Treatment Plant Work?
Sewage Treatment works in four different methods first the waste goes through the initial process called the preliminary method where most of the course solids are removed. This process includes large filtering screens these help in removing solid objects.
1. Primary treatment
After which the sewage passes to the primary treatment where 60 percent of loose solids are removed as they sink to the bottom only the water oil grease and water remain afloat. This phase removes at least 60 percent of loose solids.
2. Secondary treatment
When the wastewater comes to the secondary phase the Effluents are treated further to remove dissolve suspended biological matter. The secondary treatment uses sedimentation and biological sludge. This treatment requires a separation process to remove the micro-organisms to then release it to tertiary stage of treatment.
3. Tertiary treatment
In the last and final stage the water goes to filters again to remove more waste if any found lingering from the secondary treatment. The wastewater then is disinfected chemically either through micro-filtration which filters the water completely before releasing it to the seawater, lakes or ponds.
Additional Information: