Drinking Water Plant

Product Details:

Product Details:

With the aid of our professionals, we are engaged in offering the finest range of Mineral Water Plant. These purifying products remove impurities from the water making it clean to use.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 20 days

Product Details:

Drinking Water Plant

• RAW WATER STORAGE TANK (RWST) (BY CLIENT)

• RAW WATER PUMP (RWP)

The Raw Water would be pumped to the MGF, MCF and R.O. Module by means of Raw Water Pump. This pump will create minimum head required for the Multi Grade Filter pump to boost the water.

• MULTIGRADE SAND FILTER (MGF)

The raw water from its source will be directly passed through the MGF to remove suspended solids from the same. The Multi grade Sand filter will be designed for a filtration velocity of 19 -20 m/hr for efficient filtration.

• ACTIVATED CARBON FILTER (MGF)

The raw water from its source will be directly passed through the ACF to remove Chlorine, Color & Odor from Raw water. The Charcoal Filter will be designed for a filtration velocity of 19 - 20 m/hr for efficient filtration.

• ANTISCALENT DOSING SYSTEM

It is proposed to dose Special Food Grade Antiscalent in the feed prior to the cartridge filter for RO system to prevent saturation of various organic salts especially Silica on RO membrane surface on concentration.

The features of this Antiscalent are:

ü Prevent organic and inorganic fouling of the Reverse Osmosis system.

ü Take care of high incoming silica and bicarbonate load in the feed to the RO thus Reducing Scaling of the RO Pressure Tubes.

• MICRON CARTRIDGE FILTER (MCF)

A MCF is provided to remove fine suspended solids, which may escape from upstream units. 5 Micron cartridge filter is provided which will remove fine suspended solids up to 5 micron, which if not trapped may clog the RO membrane. This would also eliminate problems in the high-pressure pumps due to presence of particulate matter.

• CHEMICALLY SANITISABLE REVERSE OSMOSIS SYSTEM (CSRO)

CSRO will serve the purpose of Reducing TDS 800 to around < 50 ppm.

The RO unit shall have a conductivity meter at the outlet to monitor the performance.

• pH CORRECTION SYSTEM

There is the provision for pH Correction Dosing System to maintain the pH of RO Product Water. It will give an additional sweet taste in RO Product Water.

• RO WATER STORAGE TANK (ROWST)

• RO WATER TRANSFER PUMP

The RO Water would be pumped to the Post Micron Cartridge Filter & UV System by means of RO Water Transfer Pump.

• ULTRAVIOLET STERILISATION SYSTEM

UV sterilizers utilize UV germicidal lamps which emit UV-C wavelength at 253.7nm lethal to bacteria, viruses and other microorganisms present in the water. Ultraviolet technology has been one of the most effective methods of water treatment and air purification, without using any chemicals.

• ENDOTOXIN CARTRIDGE FILTER (ECF)

A ECF is known as finest polishing system. It is provided to remove fine suspended solids, which may escape from upstream units. 1 Micron & 0.2 Micron Cartridge Filter is provided which will remove fine suspended solids up to 0.2 micron, which if not trapped may ruin the RO Product Water.

• FINAL PRODUCT WATER STORAGE TANK (PWST)

• OZONATOR

Oxygen (O2) will convert into Ozone (O3) by Ozonator. Ozone destroys all the water-borne pathogens and also helps reducing some of the organics present in the water. Besides purifying the water, it is essential to maintain some amount of residual ozone in water before packaging. This helps in sterilizing the bottles or the jars in which the water is being packaged.

Additional Information:

• Item Code: UWS-2000
• Delivery Time: 30 DAYS

Product Details:

Be it deep well water, bore hole water, open well water, river water, lake water, or sea water source, most water sources are not advisable for drinking purposes due to higher contamination present. However we have the answer to all your drinking water concerns! UNITECH is considered as the best place for all water purification technologies and mineral water plants.

We are one of the best Manufacturers and Exporters of "Mineral Water Bottling Plant", "Mineral Water Plant", "Mineral Water ISI Project", "Mineral Water Turnkey Project", "Packaged Drinking Water Plant", "SS Mineral Water Plant", "Reverse Osmosis Plant", "Industrial RO Plant", "Drinking Water Plant", "Water Treatment Plant", "ISI Mineral Water Plant", "Automatic Mineral Water Plant" since 2004.

 

During our journey, we have collaborated with only the best brands and renowned manufacturers for all our plants and machineries parts and equipment’s. All the materials sourced for setting up these plants are of high quality and requires minimum maintenance. At every stage of water purification, we try to ensure that the source water meets the best water treatment processes and phenomenon. So that water can be treated in the best possible manner and people can get pure mineral water which they can rely upon anytime. This is why clients completely rely on us for their mineral water projects, due to the efficient procedures we use.

 

Our highly functional mineral water plants are capable of handling water capacity ranging from 1000 Liter/Hr to 50,000 Liter/hr. Our plants are made of sturdy stainless steel SS 316 which is an economical solution for the mineral water industry.

 

Mineral Water Turnkey Project Consists of . .

 

• Mineral Water Plant / Packaged Drinking Water Plant
• Automatic Water Bottle Filling Machine
• Pet Bottle Shrink Grouping Machine
• Automatic Digital Batch Coding Machine
• Pet Stretch Blow Moulding Machine
• Automatic Labelling Machine
• BIS Laboratory (Chemical / Laboratory)

Additional Information:

• Delivery Time: 4 - 6 WEEKS

Product Details:

Drinking Water Plant

• RAW WATER STORAGE TANK (RWST) (BY CLIENT)

• RAW WATER PUMP (RWP)

The Raw Water would be pumped to the MGF, MCF and R.O. Module by means of Raw Water Pump. This pump will create minimum head required for the Multi Grade Filter pump to boost the water.

• MULTIGRADE SAND FILTER (MGF)

The raw water from its source will be directly passed through the MGF to remove suspended solids from the same. The Multi grade Sand filter will be designed for a filtration velocity of 19 -20 m/hr for efficient filtration.

• ACTIVATED CARBON FILTER (MGF)

The raw water from its source will be directly passed through the ACF to remove Chlorine, Color & Odor from Raw water. The Charcoal Filter will be designed for a filtration velocity of 19 - 20 m/hr for efficient filtration.

• ANTISCALENT DOSING SYSTEM

It is proposed to dose Special Food Grade Antiscalent in the feed prior to the cartridge filter for RO system to prevent saturation of various organic salts especially Silica on RO membrane surface on concentration.

The features of this Antiscalent are:

ü Prevent organic and inorganic fouling of the Reverse Osmosis system.

ü Take care of high incoming silica and bicarbonate load in the feed to the RO thus Reducing Scaling of the RO Pressure Tubes.

• MICRON CARTRIDGE FILTER (MCF)

A MCF is provided to remove fine suspended solids, which may escape from upstream units. 5 Micron cartridge filter is provided which will remove fine suspended solids up to 5 micron, which if not trapped may clog the RO membrane. This would also eliminate problems in the high-pressure pumps due to presence of particulate matter.

• CHEMICALLY SANITISABLE REVERSE OSMOSIS SYSTEM (CSRO)

CSRO will serve the purpose of Reducing TDS 800 to around < 50 ppm.

The RO unit shall have a conductivity meter at the outlet to monitor the performance.

• pH CORRECTION SYSTEM

There is the provision for pH Correction Dosing System to maintain the pH of RO Product Water. It will give an additional sweet taste in RO Product Water.

• RO WATER STORAGE TANK (ROWST)

• RO WATER TRANSFER PUMP

The RO Water would be pumped to the Post Micron Cartridge Filter & UV System by means of RO Water Transfer Pump.

• ULTRAVIOLET STERILISATION SYSTEM

UV sterilizers utilize UV germicidal lamps which emit UV-C wavelength at 253.7nm lethal to bacteria, viruses and other microorganisms present in the water. Ultraviolet technology has been one of the most effective methods of water treatment and air purification, without using any chemicals.

• ENDOTOXIN CARTRIDGE FILTER (ECF)

A ECF is known as finest polishing system. It is provided to remove fine suspended solids, which may escape from upstream units. 1 Micron & 0.2 Micron Cartridge Filter is provided which will remove fine suspended solids up to 0.2 micron, which if not trapped may ruin the RO Product Water.

• FINAL PRODUCT WATER STORAGE TANK (PWST)

• OZONATOR

Oxygen (O2) will convert into Ozone (O3) by Ozonator. Ozone destroys all the water-borne pathogens and also helps reducing some of the organics present in the water. Besides purifying the water, it is essential to maintain some amount of residual ozone in water before packaging. This helps in sterilizing the bottles or the jars in which the water is being packaged.

Additional Information:

• Production Capacity: 12 PER ANNUM
• Delivery Time: 30 DAYS

Product Details:

Be it deep well water, bore hole water, open well water, river water, lake water, or sea water source, most water sources are not advisable for drinking purposes due to higher contamination present. However we have the answer to all your drinking water concerns! UNITECH is considered as the best place for all water purification technologies and mineral water plants.

We are one of the best Manufacturers and Exporters of "Mineral Water Bottling Plant", "Mineral Water Plant", "Mineral Water ISI Project", "Mineral Water Turnkey Project", "Packaged Drinking Water Plant", "SS Mineral Water Plant", "Reverse Osmosis Plant", "Industrial RO Plant", "Drinking Water Plant", "Water Treatment Plant", "ISI Mineral Water Plant", "Automatic Mineral Water Plant" since 2004.

During our journey, we have collaborated with only the best brands and renowned manufacturers for all our plants and machineries parts and equipment’s. All the materials sourced for setting up these plants are of high quality and requires minimum maintenance. At every stage of water purification, we try to ensure that the source water meets the best water treatment processes and phenomenon. So that water can be treated in the best possible manner and people can get pure mineral water which they can rely upon anytime. This is why clients completely rely on us for their mineral water projects, due to the efficient procedures we use.

Our highly functional mineral water plants are capable of handling water capacity ranging from 1000 Liter/Hr to 50,000 Liter/hr. Our plants are made of sturdy stainless steel SS 316 which is an economical solution for the mineral water industry.

Mineral Water Turnkey Project Consists of . .

• Mineral Water Plant
• Automatic Pet Bottle Rinsing Filling Capping Machine
• Pet Bottle Shrink Grouping Machine
• Automatic Digital Batch Coding Machine
• Pet Stretch Blow Moulding Machine
• Automatic Labelling Machine
• BIS Laboratory (Chemical / Laboratory)

Additional Information:

• Production Capacity: 12 PER ANNUM
• Delivery Time: 45 DAYS

Product Details:

UNITECH Packaging Systems offers professional engineering services with regard to turnkey packaging systems. Turnkey projects involving all phases of Water Treatment Plant & Food & Beverage Machinery.

UNITECH's total dedication to quality, excellent service and cost effective solutions, from single fillers to turnkey projects has since 2005 put us on the forefront of Water and Food packaging equipment suppliers.

Unitech Water Solution is an Exporter & manufacturer of Automatic 3 in 1 Rotary Bottle Rinsing Filling Capping Machine. Our series drinking water filling machine integrates Bottle Washing, Water Filling and Capping into one monoblock, and the three processes are carried out full automatically. It is used in the filling of mineral water, pure water, and other non-carbonated beverage. Each machine element that contacts with the liquid is made of high quality SS 304. The critical components are made by numerically-controlled machine tools, and the whole machine condition is under detection by photoelectric sensor, no bottle no filling, no bottle no capping. It is with advantages of high automation, easy operation, good abrasive resistance, high stability, low failure rate, etc. The quality reaches the international advanced level.

Features

1) Bottle Holding Transmission & All Star Wheels below the Neck - the bottle conveyance is stable; very convenient and swift to use different bottles for filling in the same machine by adjusting the height of conveyor and several exchanging parts.

2) Instruction & Indications Systems are Included.

3) All Machine parts are made of CNC / VMC Machine.

4) Machine is operated by Touch Screen, controlled by PLC and Frequency Convertor.

5) Filling Water Tank Low & High Level Inter Lock.

6) Machine is made of High Quality SS 304 (Jindal).

Additional Information:

• Production Capacity: 24 MACHINES PER ANNUM
• Delivery Time: 45 DAYS